The Berto Tasmota driver provides a hub for Tasmota devices on the local LAN using HTTP or from anywhere using MQTT. The driver uses the Tasmota HTTP or MQTT to communicate with devices flashed with the Tasmota Firmware so does not require access to the Internet for the driver work. When using MQTT you will need to setup the appropriate MQTT broker in the Berto Agent and configure all your Tasmota devices to use the same MQTT broker.
Devices must have Tasmota firmware version 12.3.1 Percy or above and the Maximum Payload Size for your MQTT broker configured in Berto Agent should be large enough to receive tasmota STATUS0 upodates, 8192 should be enough.
Properties
- Devices - List of available Tasmota devices.
- Product - Product model.
- Name - Device name.
- MAC Address - MAC address.
- IP Address - IP Address.
- Action - Remove the device.
- MQTT Brokers Available - List of available MQTT brokers that are setup in Berto Agent.
- Selected Broker - MQTT Broker to connect to.
- Version - Current version of the driver.
- Driver Action - Reload or Update driver.
- Debug Mode - Debug mode On or Off.
Actions
- Start Discovery - Start discovery or Tasmota devices.
- Stop Discovery - Stop discovery or Tasmota devices.
- Manual Discovery - Discovery device using IP address.
- List Devices - List devices and associated mappings.
Release Notes
v2.00 - 2024-01-01
Licence
DM