Berto Shelly

The Berto Shelly driver provides a hub for Shelly devices on the local LAN using HTTP or from anywhere using MQTT. The driver uses the Shelly HTTP or MQTT to communicate with Shelly Gen1 and Gen2 devices so does not require access to the Internet for the driver work. When using MQTT you will need to setup the appropriate MQTT broker in the Berto Agent and configure all your Shelly devices to use the same MQTT broker. For Gen2 devices you need to ensure that the MQTT prefix is starts with shellies/ in MQTT settings.

Properties

• Devices - List of available Shelly devices.
• Product - Product model.
• Name - Device name.
• MAC Address - MAC address.
• IP Address - IP Address.
• Action - Identify or Remove the device.
• MQTT Brokers Available - List of available MQTT brokers that are setup in Berto Agent.
• Selected Broker - MQTT Broker to connect to.
• Version - Current version of the driver.
• Driver Action - Reload or Update driver.
• Debug Mode - Debug mode On or Off.

Actions

• Start Discovery - Start discovery or Shelly devices.
• Stop Discovery - Stop discovery or Shelly devices.
• Manual Discovery - Discovery device using IP address.
• List Devices - List devices and associated mappings.

Release Notes

v2.00 - 2024-01-01

• Initial Release.

Licence

DM