The Berto Sky Q is an IP driver for the Sky Q and Sky Q Mini boxes.
The driver lets you control your Sky box using IR, if connected, or IP.
The control method can also be switched by holding the Select button for
between 5 and 10 seconds, useful if the network goes offline which
sometimes happen on the Sky Q box requiring a restart of the box.
Holding the Select button for over 10 seconds will cause a Reset event
to be fired allowing for programming to power cycle the Sky box.
When using IP control programming events for the Sky Q box coming
online and going offline are fired so that automatic reboots can be
carried out if required. The status of the Sky Q box is checked every 60
seconds to determine whether to fire offline and online events.
Properties
- Service - Sky Q or Sky Stream
- Default Control - The initial control method either IR or IP.
- IP Address - IP Address of the Sky Q or Sky Q Mini box.
- MAC Address - MAC Address of Sky box.
- Model - Model of Sky box.
- Firmware - Firmware version of Sky box.
- Viewing Card Number - Viewing card number of Sky box.
- Red Button - Command for button.
- Green Button - Command for button.
- Yellow Button - Command for button.
- Blue Button - Command for button.
- Menu Button - Command for button.
- Custom 1 Button - Command for button.
- Custom 2 Button - Command for button.
- Custom 3 Button - Command for button.
- Hash Button - Command for button.
- Star Button - Command for button.
Release Notes
v2.00 - 2024-01-01
v2.10 - 2024-01-01
- Add support for Sky Stream (IR Only)
Licence
DM